This is due to a re-entrant RLock(). It works sometimes, but if there
is a go routine requesting the write lock, then the second RLock()
will not be granted which will lead to a deadlock.
In summary: one should never make re-entrant RLock calls.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Along a leaf node connection, unless the system account is shared AND the JetStream domain name is identical, the default JetStream traffic (without a domain set) will be denied.
As a consequence, all clients that wants to access a domain that is not the one in the server they are connected to, a domain name must be specified.
Affected from this change are setups where: a leaf node had no local JetStream OR the server the leaf node connected to had no local JetStream.
One of the two accounts that are connected via a leaf node remote, must have no JetStream enabled.
The side that does not have JetStream enabled, will loose JetStream access and it's clients must set `nats.Domain` manually.
For workarounds on how to restore the old behavior, look at:
https://github.com/nats-io/nats-server/pull/2693#issuecomment-996212582
New config values added:
`default_js_domain` is a mapping from account to domain, settable when JetStream is not enabled in an account.
`extension_hint` are hints for non clustered server to start in clustered mode (and be usable to extend)
`js_domain` is a way to set the JetStream domain to use for mqtt.
Signed-off-by: Matthias Hanel <mh@synadia.com>
For TLS configuration with `verify_and_map` set to true, if a
connection connects and has a certificate with ID that matches
a user, but that user's `allowed_connection_types` is specified
and does not have the connection type in its list, then the
server will panic.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Check for a no_auth_user should be done only when no authentication
at all is provided by the user. This was not the case. For instance,
if the user provided a token, the server would still check for
no_auth_user if users are defined. It was not really an issue since
the admin cannot configure users AND token, but it is better for
the application to fail if providing a token that is actually not
being used. If the admin configures a no_auth_user, this should
be used only when no authentication is provided.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
This was missing since WEBSOCKET allowed connection type is really
used for client connections.
If one wants to limit a configured user to leafnode connections,
including if the connection is over websocket, but does not
want an application to connect over websocket using this user,
this would have been impossible to configure.
The JWT library has been updated to add LEAFNODE_WS and MQTT_WS for
future work.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
option name: resolver_pinned_accounts
Contains a list of public account nkeys.
Connecting user of leaf nodes need to be signed by this.
The system account will always be able to connect.
Signed-off-by: Matthias Hanel <mh@synadia.com>
* [adding] kind and client_type to client info. specifically account connect/disconnect events
Kind is Client/Leafnode but can take the value of Router/Gateway/JetStream/Account/System in the future.
When kind is Client, then client_type is set to mqtt/websocket/nats
This fixes#2291
Signed-off-by: Matthias Hanel <mh@synadia.com>
* [changed] pinned certs to check the server connected to as well
on reload clients with removed pinned certs will be disconnected.
The check happens only on tls handshake now.
Signed-off-by: Matthias Hanel <mh@synadia.com>
* [added] pinned_cert option to tls block hex(sha256(spki))
When read form config, the values are automatically lower cased.
The check when seeing the values programmatically requires
lower case to avoid having to alter the map at this point.
Signed-off-by: Matthias Hanel <mh@synadia.com>
This structure is used in ClientAuthentication, an interface
designed to let 3rd parties extend the authentication mechanisms
of the server
In order to allow those 3rd parties to create unit tests, mocks etc
we need to export this structure so it's accessible externally
Signed-off-by: R.I.Pienaar <rip@devco.net>
we want to auto-suppress JetStream traffic on normal accounts.
We also now track remote accounts so that client info headers can be remapped.
Signed-off-by: Derek Collison <derek@nats.io>
* [fixed] issue where verify_and_map: true in leaf node config was not used
This broke the setup in such a way that any connect relying on this would have failed.
This also fixes an issue where specifying no account did not result in using $G.
Signed-off-by: Matthias Hanel <mh@synadia.com>
This will cause the server to not trust accounts/user signed by an
identity key
The boot strapping system account will assume the account is issued by
the operator.
If this is not desirable, the system account can be provided right away
as resolver_preload.
[fixes] crash when the system account uses signing keys and an update changes that key set.
Signed-off-by: Matthias Hanel <mh@synadia.com>
This PR introduces native support for MQTT clients. It requires use
of accounts with JetStream enabled. Since as of now clustering is
not available, MQTT will be limited to single instance.
Only QoS 0 and 1 are supported at the moment. MQTT clients can
exchange messages with NATS clients and vice-versa.
Since JetStream is required, accounts with JetStream enabled must
exist in order for an MQTT client to connect to the NATS Server.
The administrator can limit the users that can use MQTT with the
allowed_connection_types option in the user section. For instance:
```
accounts {
mqtt {
users [
{user: all, password: pwd, allowed_connection_types: ["STANDARD", "WEBSOCKET", "MQTT"]}
{user: mqtt_only, password: pwd, allowed_connection_types: "MQTT"}
]
jetstream: enabled
}
}
```
The "mqtt_only" can only be used for MQTT connections, which the user
"all" accepts standard, websocket and MQTT clients.
Here is what a configuration to enable MQTT looks like:
```
mqtt {
# Specify a host and port to listen for websocket connections
#
# listen: "host:port"
# It can also be configured with individual parameters,
# namely host and port.
#
# host: "hostname"
port: 1883
# TLS configuration section
#
# tls {
# cert_file: "/path/to/cert.pem"
# key_file: "/path/to/key.pem"
# ca_file: "/path/to/ca.pem"
#
# # Time allowed for the TLS handshake to complete
# timeout: 2.0
#
# # Takes the user name from the certificate
# #
# # verify_an_map: true
#}
# Authentication override. Here are possible options.
#
# authorization {
# # Simple username/password
# #
# user: "some_user_name"
# password: "some_password"
#
# # Token. The server will check the MQTT's password in the connect
# # protocol against this token.
# #
# # token: "some_token"
#
# # Time allowed for the client to send the MQTT connect protocol
# # after the TCP connection is established.
# #
# timeout: 2.0
#}
# If an MQTT client connects and does not provide a username/password and
# this option is set, the server will use this client (and therefore account).
#
# no_auth_user: "some_user_name"
# This is the time after which the server will redeliver a QoS 1 message
# sent to a subscription that has not acknowledged (PUBACK) the message.
# The default is 30 seconds.
#
# ack_wait: "1m"
# This limits the number of QoS1 messages sent to a session without receiving
# acknowledgement (PUBACK) from that session. MQTT specification defines
# a packet identifier as an unsigned int 16, which means that the maximum
# value is 65535. The default value is 1024.
#
# max_ack_pending: 100
}
```
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
This follows the suggestion by phil. I added the and to be similar to verify_and_map.
I fixed a minor issue where the implicit verify could be overwriting an
explicitly configured one.
Signed-off-by: Matthias Hanel <mh@synadia.com>
had to change failing tests to use insecure as to not fail due to the
outgoing connection being not trusted.
Signed-off-by: Matthias Hanel <mh@synadia.com>
Only works for gateways and routes. When true the subject alt DNS name
must match one url in the corresponding configuration
Signed-off-by: Matthias Hanel <mh@synadia.com>
Users and NKey users will now have the option to specify a list
of allowed connection types.
This will allow for instance a certain user to be allowed to
connect as a standard NATS client, but not as Websocket, or
vice-versa.
This also fixes the websocket auth override. Indeed, with
the original behavior, the websocket users would have been bound
to $G, which would not work when there are accounts defined, since
when that is the case, no app can connect/bind to $G account.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
because times stored are hh:mm:ss it is possible to end up with start > end where end is actually the next day.
jwt.go line 189
Also, ranges are based on the servers location, not the clients.
Signed-off-by: Matthias Hanel <mh@synadia.com>
When a leafnode would connect with credentials that had permissions the spoke did not have a way of knowing what those were.
This could lead to being disconnected when sending subscriptions or messages to the hub which were not allowed.
Signed-off-by: Derek Collison <derek@nats.io>
We added authentication override block for websocket configuration
in PR #1463 and #1465 which somehow introduced a drop in perf as
reported by the bench tests.
This PR refactors a bit to restore the performance numbers.
This change also fixes the override behavior for websocket auth:
- If websocket's NoAuthUser is configured, the websocket's auth
block MUST define Users, and the user be present.
- If there is any override (username/pwd,token,etc..) then the
whole block config will be used when authenticating a websocket
client, which means that if websocket NoAuthUser is empty we
are not falling back to the regular client's NoAuthUser config.
- TLSMap always override the regular client's config. That is,
whatever TLSMap value specified in the websocket's tls{} block
will be used.
The TLSMap configuration was not used for LeafNodes. The behavior
now will be:
- If LeafNode's auth block contains users and TLSMap is true,
the user is looked up based on the cert's info. If not found,
authentication will fail. If found, it will be authenticated
and bound to associated account.
- If no user is specified in LeafNode's auth block and TLSMap
is true, then the cert's info will be used against the global
users map.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Building server's nkeys and users map out of slices form options
has been made a function so it can be used for the server and
websocket (and in future for mqtt)
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
