This is similar to PR #4115 but for LeafNodes.
Compression mode can be set on both side (the accept and in remotes).
```
leafnodes {
port: 7422
compression: s2_best
remotes [
{
url: "nats://host2:74222"
compression: s2_better
}
]
}
```
Possible modes are similar than for routes (described in PR #4115),
except that when not defined we default to `s2_auto`.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Added a leafnode lock to allow better traversal without copying of large leafnodes in a single hub account.
Signed-off-by: Derek Collison <derek@nats.io>
One should not access s.opts directly but instead use s.getOpts().
Also, server lock needs to be released when performing an account
lookup (since this may result in server lock being acquired).
A function was calling s.LookupAccount under the client lock, which
technically creates a lock inversion situation.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
In that mode, a server accepts and will switch to same compression
level than the remote (if one is set) but will not initiate compression.
So if all servers in a cluster do not have compression setting set,
it defaults to "accept" which means that compression is "off".
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The new field `compression` in the `cluster{}` block allows to
specify which compression mode to use between servers.
It can be simply specified as a boolean or a string for the
simple modes, or as an object for the "s2_auto" mode where
a list of RTT thresholds can be specified.
By default, if no compression field is specified, the server
will use the s2_auto mode with default RTT thresholds of
10ms, 50ms and 100ms for the "uncompressed", "fast", "better"
and "best" modes.
```
cluster {
..
# Possible values are "disabled", "off", "enabled", "on",
# "accept", "s2_fast", "s2_better", "s2_best" or "s2_auto"
compression: s2_fast
}
```
To specify a different list of thresholds for the s2_auto,
here is how it would look like:
```
cluster {
..
compression: {
mode: s2_auto
# This means that for RTT up to 5ms (included), then
# the compression level will be "uncompressed", then
# from 5ms+ to 15ms, the mode will switch to "s2_fast",
# then from 15ms+ to 50ms, the level will switch to
# "s2_better", and anything above 50ms will result
# in the "s2_best" compression mode.
rtt_thresholds: [5ms, 15ms, 50ms]
}
}
```
Note that the "accept" mode means that a server will accept
compression from a remote and switch to that same compression
mode, but will otherwise not initiate compression. That is,
if 2 servers are configured with "accept", then compression
will actually be "off". If one of the server had say s2_fast
then they would both use this mode.
If a server has compression mode set (other than "off") but
connects to an older server, there will be no compression between
those 2 routes.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
One should not access s.opts directly but instead use s.getOpts().
Also, server lock needs to be released when performing an account
lookup (since this may result in server lock being acquired).
A function was calling s.LookupAccount under the client lock, which
technically creates a lock inversion situation.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
New configuration fields:
```
cluster {
...
pool_size: 5
accounts: ["A", "B"]
}
```
The configuration `pool_size` in the example above means that this
server will create 5 routes to a remote server, assuming that that
server has the same `pool_size` setting.
Accounts (which are not part of the `accounts[]` configuration)
are assigned a specific route in this pool, and this will be the
same route on all servers in the cluster.
Accounts that are defined in the `accounts` field will each have
a dedicated route connection. This will allow suppression of the
account name in some of the route protocols, reducing bytes transmitted
which may increase performance.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
This adds the ability to augment or override the NATS auth system.
A server will send a signed request to $SYS.REQ.USER.AUTH on the specified account. The request will contain client information, all client options sent to the server, and optionally TLS information and client certificates.
The external auth service will respond with an empty message if not authorized, or a signed User JWT that the user will bind to.
The response can change the account the client will be bound to.
Signed-off-by: Derek Collison <derek@nats.io>
- Save the TLS name only if not already set
- Use the passed URLs slice instead of using s.getOpts().Routes
- Enhanced the test
- Fixed an unrelated DATA RACE report
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The server was not setting "server name" in the TLS configuration
for route connections, which may lead to failed (re)connect if
the certificate does not allow for the IP and the URL did not
have the hostname, which would happen with gossip protocol.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
If an ephemeral was given a name by the user, if the consumer leader
was then shutdown, the ephemeral would be migrated using a server
generated new name instead of keeping the user given name.
Also, in some cases the migration would not even occur. This was
likely due to the fact that RAFT node(s) were shutdown prior to
the ephemeral migration code was invoked.
Resolves#3550
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
A request to `$SYS.REQ.SERVER.PING.JSZ` would now return something
like this:
```
...
"meta_cluster": {
"name": "local",
"leader": "A",
"peer": "NUmM6cRx",
"replicas": [
{
"name": "B",
"current": true,
"active": 690369000,
"peer": "b2oh2L6w"
},
{
"name": "Server name unknown at this time (peerID: jZ6RvVRH)",
"current": false,
"offline": true,
"active": 0,
"peer": "jZ6RvVRH"
}
],
"cluster_size": 3
}
```
Note the "peer" field following the "leader" field that contains
the server name. The new field is the node ID, which is a hash of
the server name.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The original value was hardcoded to 128MB and 32MB per stream. The
per-server limit is lowered to 32MB but is configurable with
a new configuration parameter:
```
jetstream {
max_catchup: 8MB
}
```
The per-stream limit was also lowered from 32MB/128,000msgs to
8MB/32,000 messages.
Tests have shown no difference in performance for fast links.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Add basic peer certificates information in /connz endpoint when
the "auth" option is provided.
Resolves#3317
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
We are phasing out the optimistic-only mode. Servers accepting
inbound gateway connections will switch the accounts to interest-only
mode.
The servers with outbound gateway connection will check interest
and ignore the "optimistic" mode if it is known that the corresponding
inbound is going to switch the account to interest-only. This is
done using a boolean in the gateway INFO protocol.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
