When tls is on routes it can cause reloadAuthorization to be called.
We were assuming configured accounts, but did not copy the remote map.
This copies the remote map when transferring for configured accounts
and also handles operator mode. In operator mode we leave the accounts
in place, and if we have a memory resolver we will remove accounts that
are not longer defined or have bad claims.
Signed-off-by: Derek Collison <derek@nats.io>
Such endpoint will list the gateway/cluster name, address and port
then list of outbound/inbound connections.
For each remote gateway there will be at most one outbound connection.
There can be 0 or more inbound connections for the same remote
gateway.
For each of these outbound/inbound connection, the connection info
similar to Connz is reported. Optionally, one can include the
interest mode/stats for each account.
Here are possible options:
* No specific options
http://host:port/gatewayz
* Limit to specific remote gateway, say name "B":
http://host:port/gatewayz/gw_name=B
* Include accounts (default limit to 1024 accounts)
http://host:port/gatewayz/accs=1
* Specific limit, say 200 (note accs=1 in this case is optional)
http://host:port/gatewayz/accs=1&accs_limit=200
* Specific account, say "acc_1". Note that accs=1 is not required then
http://host:port/gatewayz/acc_name=acc_1
* Above options can be mixed: specific remote gateway (B), with 100
accounts reported
http://host:port/gatewayz/gw_name=B&accs_limit=200
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Changed the introduced new option and added a new one. The idea
is to be able to differentiate between never connected and reconnected
event. The never connected situation will be logged at first attempt
and every hour (by default, configurable).
However, once connected and if trying to reconnect, will report every
attempts by default, but this is configurable too.
These two options are supported for config reload.
Related to #1000
Related to #1001Resolves#969
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
In varz's cluster{} section, there was no URLs field. This PR adds
it and displays the routes defined in the cluster{} config section.
The value gets updated should there be a config reload following
addition/removal of an url from "routes".
If config had 1 route to "nats://127.0.0.1:1234", here is what
it would look like now:
```
"cluster": {
"addr": "0.0.0.0",
"cluster_port": 6222,
"auth_timeout": 1,
"urls": [
"127.0.0.1:1234"
]
},
```
Adding route to "127.0.0.1:4567" and doing config reload:
```
"cluster": {
"addr": "0.0.0.0",
"cluster_port": 6222,
"auth_timeout": 1,
"urls": [
"127.0.0.1:1234",
"127.0.0.1:4567"
]
},
```
Note that due to how we handle discovered servers in the cluster,
new urls dynamically discovered will not show in above output.
This could be done, but would need some changes in how we store
things (actually in this case, new urls are not stored, just
attempted to be connected. Once they connect, they would be visible
in /routez).
For gateways, however, this PR displays the combination of the
URLs defined in config and the ones that are discovered after
a connection is made to a give cluster. So say cluster A has a single
url to one server in cluster B, when connecting to that server,
the server on A will get the list of the gateway URLs that one
can connect to, and these will be reflected in /varz. So this is
a different behavior that for routes. As explained above, we could
harmonize the behavior in a future PR.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Previously we would walk all clients bound to an account to
collect the leaf nodes for updating of the subscription maps.
Signed-off-by: Derek Collison <derek@nats.io>
----------------------------------------------------------------
Backward-incompatibility note:
Varz used to embed *Info and *Options which are other server objects.
However, Info is a struct that servers used to send protocols to other
servers or clients and its content must contain json tags since we
need to marshal those to be sent over. The problem is that it made
those fields now accessible to users calling Varz() and also visible
to the http /varz output. Some fields in Info were introduced in the
2.0 branch that clashed with json tag in Options, which made cluster{}
for instance disappear in the /varz output - because a Cluster string
in Info has the same json tag, and Cluster in Info is empty in some
cases.
For users that embed NATS and were using Server.Varz() directly,
without the use of the monitoring endpoint, they were then given
access (which was not the intent) to server internals (Info and Options).
Fields that were in Info or Options or directly in Varz that did not
clash with each other could be referenced directly, for instace, this
is you could access the server ID:
v, _ := s.Varz(nil)
fmt.Println(v.ID)
Another way would be:
fmt.Println(v.Info.ID)
Same goes for fields that were brought from embedding the Options:
fmt.Println(v.MaxConn)
or
fmt.Println(v.Options.MaxConn)
We have decided to explicitly define fields in Varz, which means
that if you previously accessed fields through v.Info or v.Options,
you will have to update your code to use the corresponding field
directly: v.ID or v.MaxConn for instance.
So fields were also duplicated between Info/Options and Varz itself
so depending on which one your application was accessing, you may
have to update your code.
---------------------------------------------------------------
Other issues that have been fixed is races that were introduced
by the fact that the creation of a Varz object (pointing to
some server data) was done under server lock, but marshaling not
being done under that lock caused races.
The fact that object returned to user through Server.Varz() also
had references to server internal objects had to be fixed by
returning deep copy of those internal objects.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
A server that creates a LeafNode connection to a remote cluster
will now be notified of all possible LeafNode URLs in that cluster.
The list is updated when nodes in the cluster come and go.
Also support for advertise address, similar to cluster, gateway, etc..
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
What is not completed:
1. TLS
2. config to bind local account.
3. Info updates for solicitor to track topology changes like a client.
4. CONNECT sent after INFO for nonce authroization.
5. Authorization
6. Services and Streams tests.
7. config file parsing.
Signed-off-by: Derek Collison <derek@nats.io>
Based on @softkbot PR #913.
Removed the command line parameter, which then removes the need for Options.Cluster.TLSInsecure.
Added a test with config reload.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
We now send A- if an account does not exists, or if there is no
interest on a given subject and no existing subscription.
An A+ is sent if an A- was previously sent and a subscription
for this account is registered.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Converted to authorization error events on different subject.
Add cluster name if gateways are configured and pass in INFO to clients.
Signed-off-by: Derek Collison <derek@nats.io>
Otherwise, this may be sent to servers in the cluster and to other
gateways which may result in attempt to connect to self which
in case of TLS would produce error.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Changed account lookup and validation failures to be more understandable by users.
Changed limits to be -1 for unlimited to match jwt pkg.
The limits changed exposed problems with options holding real objects causing issues with reload tests under race mode.
Longer term this code should be reworked such that options only hold config data, not real structs, etc.
Signed-off-by: Derek Collison <derek@nats.io>
Added update to parse and load operator JWTs.
Changed to add in signing keys from operator JWT to list of trusted keys.
Added URL account resolver.
Added account claim updates by system messages.
Signed-off-by: Derek Collison <derek@nats.io>
Specifically this is to support distributed tracking of number of account connections across clusters.
Gateways may not work yet based on attempts to only generate payloads when we know there is outside interest.
Signed-off-by: Derek Collison <derek@nats.io>
- Increase grace period to 10sec
- Make default 2min
- Reject config with value less than 30sec
- Don't wait more than 1sec between clients if there are much
less than alloted time
- Stop after last one (was still sleeping after last client was
closed)
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
- Solve RS+ with wildcards
- Solve issue with messages not send to remote gateways queue subs
if there was a qsub on local server.
- Made rcache a perAccountCache since it is now used by routes and
gateways
- Order outbound gateways only on RTT updates
- Print a server's gateway name on startup
- Augment/add some tests
- Update TLS handling: when connecting, use hostname for ServerName
if url is not IP, otherwise use a hostname that we saved when
parsing/adding URLs for the remote gateway.
- Send big buffer in chunks if needed.
- Add caching for qsubs match
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
