This is similar to PR #4115 but for LeafNodes.
Compression mode can be set on both side (the accept and in remotes).
```
leafnodes {
port: 7422
compression: s2_best
remotes [
{
url: "nats://host2:74222"
compression: s2_better
}
]
}
```
Possible modes are similar than for routes (described in PR #4115),
except that when not defined we default to `s2_auto`.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The new field `compression` in the `cluster{}` block allows to
specify which compression mode to use between servers.
It can be simply specified as a boolean or a string for the
simple modes, or as an object for the "s2_auto" mode where
a list of RTT thresholds can be specified.
By default, if no compression field is specified, the server
will use the s2_auto mode with default RTT thresholds of
10ms, 50ms and 100ms for the "uncompressed", "fast", "better"
and "best" modes.
```
cluster {
..
# Possible values are "disabled", "off", "enabled", "on",
# "accept", "s2_fast", "s2_better", "s2_best" or "s2_auto"
compression: s2_fast
}
```
To specify a different list of thresholds for the s2_auto,
here is how it would look like:
```
cluster {
..
compression: {
mode: s2_auto
# This means that for RTT up to 5ms (included), then
# the compression level will be "uncompressed", then
# from 5ms+ to 15ms, the mode will switch to "s2_fast",
# then from 15ms+ to 50ms, the level will switch to
# "s2_better", and anything above 50ms will result
# in the "s2_best" compression mode.
rtt_thresholds: [5ms, 15ms, 50ms]
}
}
```
Note that the "accept" mode means that a server will accept
compression from a remote and switch to that same compression
mode, but will otherwise not initiate compression. That is,
if 2 servers are configured with "accept", then compression
will actually be "off". If one of the server had say s2_fast
then they would both use this mode.
If a server has compression mode set (other than "off") but
connects to an older server, there will be no compression between
those 2 routes.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
New configuration fields:
```
cluster {
...
pool_size: 5
accounts: ["A", "B"]
}
```
The configuration `pool_size` in the example above means that this
server will create 5 routes to a remote server, assuming that that
server has the same `pool_size` setting.
Accounts (which are not part of the `accounts[]` configuration)
are assigned a specific route in this pool, and this will be the
same route on all servers in the cluster.
Accounts that are defined in the `accounts` field will each have
a dedicated route connection. This will allow suppression of the
account name in some of the route protocols, reducing bytes transmitted
which may increase performance.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
If set, a server configured to accept leafnode connections will
reject a remote server whose version is below that value. Note
that servers prior to v2.8.0 are not sending their version
in the CONNECT protocol, which means that anything below 2.8.0
would be rejected.
Configuration example:
```
leafnodes {
port: 7422
min_version: 2.8.0
}
```
The option is a string and can have the "v" prefix:
```
min_version: "v2.9.1"
```
Note that although suffix such as `-beta` would be accepted,
only the major, minor and update are used for the version comparison.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
If accounts{} block is specified, authorization{} should not have
any user/password/token or users array defined.
The reason is that users parsed in accounts{} are associated with
their respective account but users parsed in authorization{} are
associated with the global account. If the same user name is
in both, and since internally the parsing of those 2 blocks is
completely random (even if layed out in the config in a specific
order), the outcome may be that a user is either associated with
an account or the default global account.
To minimize breaking changes, but still avoid this unexpected
outcome, the server will now detect if there are duplicate users
(or nkeys) inside authorization{} block itself, but also between
this block and accounts{}.
The check will also detect if accounts{} has any user/nkey, then
the authorization{} block should not have any user/password/token,
making this test similar to the check we had in authorization{}
block itself.
Resolves#2926
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Authentication token has never been supported for cluster and
gateway (and leafnode). There is not even a Token option in
ClusterOpts or GatewayOpts.
However, the parsing of the configuration was not rejecting this
misconfiguration, making users believe that token was used for
authentication.
Documentation will also be fixed since it is reported there that
token is supported, which again, has never been the case.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Currently in tests, we have calls to os.Remove and os.RemoveAll where we
don't check the returned error. This hides useful error messages when
tests fail to run, such as "too many open files".
This change checks for more filesystem related errors and calls t.Fatal
if there is an error.
This PR introduces native support for MQTT clients. It requires use
of accounts with JetStream enabled. Since as of now clustering is
not available, MQTT will be limited to single instance.
Only QoS 0 and 1 are supported at the moment. MQTT clients can
exchange messages with NATS clients and vice-versa.
Since JetStream is required, accounts with JetStream enabled must
exist in order for an MQTT client to connect to the NATS Server.
The administrator can limit the users that can use MQTT with the
allowed_connection_types option in the user section. For instance:
```
accounts {
mqtt {
users [
{user: all, password: pwd, allowed_connection_types: ["STANDARD", "WEBSOCKET", "MQTT"]}
{user: mqtt_only, password: pwd, allowed_connection_types: "MQTT"}
]
jetstream: enabled
}
}
```
The "mqtt_only" can only be used for MQTT connections, which the user
"all" accepts standard, websocket and MQTT clients.
Here is what a configuration to enable MQTT looks like:
```
mqtt {
# Specify a host and port to listen for websocket connections
#
# listen: "host:port"
# It can also be configured with individual parameters,
# namely host and port.
#
# host: "hostname"
port: 1883
# TLS configuration section
#
# tls {
# cert_file: "/path/to/cert.pem"
# key_file: "/path/to/key.pem"
# ca_file: "/path/to/ca.pem"
#
# # Time allowed for the TLS handshake to complete
# timeout: 2.0
#
# # Takes the user name from the certificate
# #
# # verify_an_map: true
#}
# Authentication override. Here are possible options.
#
# authorization {
# # Simple username/password
# #
# user: "some_user_name"
# password: "some_password"
#
# # Token. The server will check the MQTT's password in the connect
# # protocol against this token.
# #
# # token: "some_token"
#
# # Time allowed for the client to send the MQTT connect protocol
# # after the TCP connection is established.
# #
# timeout: 2.0
#}
# If an MQTT client connects and does not provide a username/password and
# this option is set, the server will use this client (and therefore account).
#
# no_auth_user: "some_user_name"
# This is the time after which the server will redeliver a QoS 1 message
# sent to a subscription that has not acknowledged (PUBACK) the message.
# The default is 30 seconds.
#
# ack_wait: "1m"
# This limits the number of QoS1 messages sent to a session without receiving
# acknowledgement (PUBACK) from that session. MQTT specification defines
# a packet identifier as an unsigned int 16, which means that the maximum
# value is 65535. The default value is 1024.
#
# max_ack_pending: 100
}
```
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
This follows the suggestion by phil. I added the and to be similar to verify_and_map.
I fixed a minor issue where the implicit verify could be overwriting an
explicitly configured one.
Signed-off-by: Matthias Hanel <mh@synadia.com>
Only works for gateways and routes. When true the subject alt DNS name
must match one url in the corresponding configuration
Signed-off-by: Matthias Hanel <mh@synadia.com>
Users and NKey users will now have the option to specify a list
of allowed connection types.
This will allow for instance a certain user to be allowed to
connect as a standard NATS client, but not as Websocket, or
vice-versa.
This also fixes the websocket auth override. Indeed, with
the original behavior, the websocket users would have been bound
to $G, which would not work when there are accounts defined, since
when that is the case, no app can connect/bind to $G account.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The grace period used to be hardcoded at 10 seconds.
This option allows the user to configure the amount of time the
server will wait before initiating the closing of client connections.
Note that the grace period needs to be strictly lower than the overall
lame_duck_duration. The server deducts the grace period from that
overall duration and spreads the closing of connections during
that time.
For instance, if there are 1000 connections and the lame duck
duration is set to 30 seconds and grace period to 10, then
the server will use 30-10 = 20 seconds to spread the closing
of those 1000 connections, so say roughly 50 clients per second.
Resolves#1459.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Running test suite on a Windows VM, I notice several failures.
Updated the compute of the RTT to be at least 1ns. I think that
this is just an issue with the VM I am running, but that change
will have no impact for normal situations (since setting the rtt
to the very minimum duration (1ns) instead of 0) and will prevent
some tests from failing.
Because of those same timer granularity issues, I had to add some
delays between some actions in order for time.Sub()/Since() to
actually report something more than 0.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Added a way to specify which account an accepted leafnode connection
should be bound to when using simple auth (user/password).
Singleton:
```
leafnodes {
port: ...
authorization {
user: leaf
password: secret
account: TheAccount
}
}
```
With above configuration, if a soliciting server creates a LN connection
with url: `nats://leaf:secret@host:port`, then the accepting server
will bind the leafnode connection to the account "TheAccount". This account
need to exist otherwise the connection will be rejected.
Multi:
```
leafnodes {
port: ...
authorization {
users = [
{user: leaf1, password: secret, account: account1}
{user: leaf2, password: secret, account: account2}
]
}
}
```
With the above, if a server connects using `leaf1:secret@host:port`, then
the accepting server will bind the connection to account `account1`.
If user/password (either singleton or multi) is defined, then the connecting
server MUST provide the proper credentials otherwise the connection will
be rejected.
If no user/password info is provided, it is still possible to provide the
account the connection should be associated with:
```
leafnodes {
port: ...
authorization {
account: TheAccount
}
}
```
With the above, a connection without credentials will be bound to the
account "TheAccount".
If credentials are used (jwt, nkey or other), then the server will attempt
to authenticate and if successful associate to the account for that specific
user. If the user authentication fails (wrong password, no such user, etc..)
the connection will be also rejected.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Report error from configuration parsing, and also return error
in AddServiceImport() (and its variants).
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Currently, the config file doesn't recognize the latency config block in
account exports. This change exposes those settings in the config file.
Signed-off-by: Jaime Piña <jaime@synadia.com>
Signed-off-by: Waldemar Quevedo <wally@synadia.com>
Bump default TLS timeout for leafnode connections
Add checks for when cert_file or key_file are missing in TLS config
Signed-off-by: Waldemar Quevedo <wally@synadia.com>
When receiving SIGUSR2 signal (or -sl ldm) the server stops
accepting new clients, closes routes connections and spread the
closing of client connections based on a config lame duck duration
(default is 30sec). This will help preventing a storm of client
reconnect when a server needs to be shutdown.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Show warnings on server startup
Removes notions around `pedantic` checks and instead
just reports the warnings in case there were any, or
the collection of errors that may have been found
in the configuration file.
Signed-off-by: Waldemar Quevedo <wally@synadia.com>
