New configuration fields:
```
cluster {
...
pool_size: 5
accounts: ["A", "B"]
}
```
The configuration `pool_size` in the example above means that this
server will create 5 routes to a remote server, assuming that that
server has the same `pool_size` setting.
Accounts (which are not part of the `accounts[]` configuration)
are assigned a specific route in this pool, and this will be the
same route on all servers in the cluster.
Accounts that are defined in the `accounts` field will each have
a dedicated route connection. This will allow suppression of the
account name in some of the route protocols, reducing bytes transmitted
which may increase performance.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
A request to `$SYS.REQ.SERVER.PING.JSZ` would now return something
like this:
```
...
"meta_cluster": {
"name": "local",
"leader": "A",
"peer": "NUmM6cRx",
"replicas": [
{
"name": "B",
"current": true,
"active": 690369000,
"peer": "b2oh2L6w"
},
{
"name": "Server name unknown at this time (peerID: jZ6RvVRH)",
"current": false,
"offline": true,
"active": 0,
"peer": "jZ6RvVRH"
}
],
"cluster_size": 3
}
```
Note the "peer" field following the "leader" field that contains
the server name. The new field is the node ID, which is a hash of
the server name.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The CLI will now be able to display the peer IDs in MetaGroupInfo
if it choses to do so, and possibly help user select the peer ID
from a list with a new command to remove by peer ID instead of
by server name.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
- Change finger_prints to cert_sha256 and use hex.EncodeToString
- Add spki_sha256 for RawSubjectPublicKeyInfo with hex.EncodeToString
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Add basic peer certificates information in /connz endpoint when
the "auth" option is provided.
Resolves#3317
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
We are phasing out the optimistic-only mode. Servers accepting
inbound gateway connections will switch the accounts to interest-only
mode.
The servers with outbound gateway connection will check interest
and ignore the "optimistic" mode if it is known that the corresponding
inbound is going to switch the account to interest-only. This is
done using a boolean in the gateway INFO protocol.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
Added http monitoring endpoint /accstatz
It responds with a list of statz for all accounts with local connections
the argument "unused=1" can be provided to get statz for all accounts
This endpoint is also exposed as nats request under:
This monitoring endpoint is exposed via the system account.
$SYS.REQ.ACCOUNT.*.STATZ
Each server will respond with connection statistics for the requested
account. The format of the data section is a list (size 1) identical to the event
$SYS.ACCOUNT.%s.SERVER.CONNS which is sent periodically as well as on
connect/disconnect. Unless requested by options, server without the account,
or server where the account has no local connections, will not respond.
A PING endpoint exists as well. The response format is identical to
$SYS.REQ.ACCOUNT.*.STATZ
(however the data section will contain more than one account, if they exist)
In addition to general filter options the request takes a list of accounts and
an argument to include accounts without local connections (disabled by default)
$SYS.REQ.ACCOUNT.PING.STATZ
Each account has a new system account import where the local subject
$SYS.REQ.ACCOUNT.PING.STATZ essentially responds as if
the importing account name was used for $SYS.REQ.ACCOUNT.*.STATZ
The only difference between requesting ACCOUNT.PING.STATZ from within
the system account and an account is that the later can only retrieve
statz for the account the client requests from.
Also exposed the monitoring /healthz via the system account under
$SYS.REQ.SERVER.*.HEALTHZ
$SYS.REQ.SERVER.PING.HEALTHZ
No dedicated options are available for these.
HEALTHZ also accept general filter options.
Signed-off-by: Matthias Hanel <mh@synadia.com>
Added Start, LastActivity, Uptime and Idle that we normally have
in a Connz for non route connections. This info can be useful
to determine if a route is recent, etc..
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
This was introduced in v2.6.6. In order to solve a config reload
issue, we used tls.Config.GetConfigForClient which allowed the
TLS configuration to be "refreshed" with the latest. However, in
this case, the tls.Config.ClientAuth was not reset to tls.NoClientCert
which we need for monitoring port.
Resolves#2980
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The data from other nodes are usually wrong, this can be quite
confusing for users so we now only send it when we are the leader
Signed-off-by: R.I.Pienaar <rip@devco.net>
Also had to change all references from `path.` to `filepath.` when
dealing with files, so that it works properly on Windows.
Fixed also lots of tests to defer the shutdown of the server
after the removal of the storage, and fixed some config files
directories to use the single quote `'` to surround the file path,
again to work on Windows.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
The established ordering is client -> Account, so fixed few places
where we had Account -> client.
Added a new file, locksordering.txt with the list of known ordering
for some of the objects.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
This allows stream placement to overflow to adjacent clusters.
We also do more balanced placement based on resources (store or mem). We can continue to expand this as well.
We also introduce an account requirement that stream configs contain a MaxBytes value.
We now track account limits and server limits more distinctly, and do not reserver server resources based on account limits themselves.
Signed-off-by: Derek Collison <derek@nats.io>
When creating the http server, we need to provide a TLS configuration.
After a config reload, the new TLS config would not be reflected.
We had the same issue with Websocket and was fixed with the use
of tls.Config.GetConfigForClient API, which makes the TLS handshake
to ask for a TLS config. That fix for websocket was simply not applied
to the HTTPs monitoring case.
I have also fixed some flappers due to the use of localhost instead
of 127.0.0.1 (connections possibly would resolve to some IPv6 address
that the server would not accept, etc..)
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
- When detecting duplicate route, it was possible that a server
would lose track of the peer's gateway URL, which would prevent
it from gossiping that URL to inbound gateway connections
- When a server has gateways enabled and has as a remote its
own gateway, the monitoring endpoint `/varz` would include it
but without the "urls" array.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
When servers leave a cluster and their gateway URLs was not in
the remote cluster's configuration, it is possible that their
gateway URL do not disappear from the list of URLs in the `/varz`
monitoring endpoint.
Signed-off-by: Ivan Kozlovic <ivan@synadia.com>
