mirror of
https://github.com/taigrr/gopher-os
synced 2025-01-18 04:43:13 -08:00
2558f79fbf
The switch to 64-bit mode allows us to use 48-bit addressing and to relocate the kernel to virtual address 0xffff800000000000 + 1M. The actual kernel is loaded by the bootloader at physical address 1M. The rt0 code has been split in two parts. The 32-bit part provides the entrypoint that the bootloader jumps to after loading the kernel. Its purpose is to make sure that: - the kernel was booted by a multiboot-compliant bootloader - the multiboot info structures are copied to a reserved memory block where they can be accessed after enabling paging - the CPU meets the minimum requirements for the kernel (CPUID, SSE, support for long-mode) Since paging is not enabled when the 32-bit code runs, it needs to translate all memory addresses it accesses to physical memory addresses by subtracting PAGE_OFFSET. The 32-bit rt0 code will set up a page table that identity-maps region: 0 to 8M and region: PAGE_OFFSET to PAGE_OFFSET+8M. This ensures that when paging gets enabled, we will still be able to access the kernel using both physical and virtual memory addresses. After enabling paging, the 32-bit rt0 will jump to a small 64-bit trampoline function that updates the stack pointer to use the proper virtual address and jumps to the virtual address of the 64-bit entry point. The 64-bit entrypoint sets up the minimal g0 structure required by the go function prologue for stack checks and sets up the FS register to point to it. The principle is the same as with 32-bit code (a segment register has the address of a pointer to the active g) with the difference that in 64-bit mode, the FS register is used instead of GS and that in order to set its value we need to write to a MSR.
42 lines
1.2 KiB
ArmAsm
42 lines
1.2 KiB
ArmAsm
; vim: set ft=nasm :
|
||
|
||
section .multiboot_header
|
||
|
||
MAGIC equ 0xe85250d6
|
||
ARCH equ 0x0
|
||
|
||
; Define the multiboot header (multiboot 1.6)
|
||
; http://nongnu.askapache.com/grub/phcoder/multiboot.pdf
|
||
header_start:
|
||
dd MAGIC ; magic number
|
||
dd ARCH ; i386 protected mode
|
||
dd header_end - header_start ; header length
|
||
|
||
; The field ‘checksum’ is a 32-bit unsigned value which, when added to the other
|
||
; magic fields (i.e. ‘magic’, ‘architecture’ and ‘header_length’), must have a
|
||
; 32-bit unsigned sum of zero.
|
||
dd (1 << 32) - (MAGIC + ARCH + (header_end - header_start))
|
||
|
||
; Console flags tag
|
||
align 8 ; tags should be 64-bit aligned
|
||
dw 4 ; type
|
||
dw 0 ; flags
|
||
dd 12 ; size
|
||
dd 0x3 ; kernel supports EGA console
|
||
|
||
; Define graphics mode tag
|
||
;align 8 ; tags should be 64-bit aligned
|
||
;dw 5 ; type
|
||
;dw 0 ; flags
|
||
;dd 20 ; size
|
||
;dd 80 ; width (pixels or chars)
|
||
;dd 25 ; height (pixels or chars)
|
||
;dd 0 ; bpp (0 for text mode
|
||
|
||
; According to page 6 of the spec, the tag list is terminated by a tag with
|
||
; type 0 and size 8
|
||
align 8 ; tags should be 64-bit aligned
|
||
dd 0 ; type & flag = 0
|
||
dd 8 ; size
|
||
header_end:
|